-
UnknownEditor
4Someone is looking to buy connectors that are set up for the 90 degree W/G transition on this page:
https://www.microwaves101.com/encyclopedias/waveguide-to-coax-transitions
Is there a source for these, with the E-plane probe already integrated? Or maybe just the a connector with a slip-on E-plane probe that could be soldered in place?
Any help is appreciated!
Steve -
W Uffing
0I only found this website today while trying to identify scrap waveguide components during a shed clearout. This item, see https://www.flickr.com/photos/161663409@N03/44239680852/in/dateposted-public/ seems relevant to the discussion but my question is "what metal is the shiny lustrous block on the sliding rod inside the waveguide?" Its S.G. seems to be about 8.2 Many thanks.
A second photo is at https://www.flickr.com/photos/161663409@N03/42479828220/in/dateposted-public/
Welcome!
Join the international conversation on a broad range of microwave and RF topics. Learn about the latest developments in our industry, post questions for your peers to answer, and weigh in with some answers if you can!
Categories
- About Our Site
- Antennas
- Applications
- Biological Effects and Applications
- Calculators
- Communications
- Computer Aided Design
- EDA Software
- Emerging Applications and Technology
- Employment
- Field Theory
- Filters and Passives
- General Questions
- High Power
- History
- MMIC and RFIC
- Packaging and Materials
- Radar
- Sources and Receivers
- Test and Measurement
More Discussions
- Steps for connecting Femal-to-Female adaptor into a male connector in the RF measurement equipment
- Working out the dimensions of an 'end launch' waveguide to coax transition
- Any article/paper on use of high frequency signals ( up to 100Mhz) on General purpose connector?
- Heating problem Waveguide WR 1800 to Coaxial Adapter
- Terms of Service
- Useful Hints and Tips
- Sign In
- © 2024 Microwaves 101 Discussion Board