Any article/paper on use of high frequency signals ( up to 100Mhz) on General purpose connector?
For high frequency application like Ethernet, we typically use special purpose connectors.
I am thinking of 100Mbps speed.
What happens if I use regular connector used for electronic control module?
Will it work? is there any article which is published which shows measurement results?
Will impedance matching be sufficient to retain signal integrity & reduce losses? or any extra care needs to be taken?
If your bandwidth is a only few 100 MHz, then some wiring oddities over a few cm will do no harm. As a rule of thumb, a transmission line discontinuity of 1/20 lambda long is tolerable. From my dim recall of communications theory, 100 Mbits/sec requires a bandwidth of at least 150 MHz. Lamda for 150 MHz is 2m. So a dodgy bit of transmission line no more than 0.1m should be tolerable. Well, yikes! I would never put up with such a mess at VHF. I am sure you can do better.
I should point out here that microwaves101 is dedicated to microwave topics, where interesting things happen at frequencies of many GHz, and physical features of fractions of a millimeter. On my own admission, I do not really belong here, as my RF expertise is in UHF (300 to 1000 MHz), not microwaves. Having said that, microwaves101 has provided many useful guidelines for my designs.
On a more practical note, the answer to the question "will it work?" is to test it. To me, testing means hiring some kit or a lab session to find out whether your non-standard connector affects attenuation, bit error rate, and so on.
Sign in or register to add a comment.
Add a Comment
About Our Site
Biological Effects and Applications
Computer Aided Design
Emerging Applications and Technology
Filters and Passives
MMIC and RFIC
Packaging and Materials
Sources and Receivers
Test and Measurement
Steps for connecting Femal-to-Female adaptor into a male connector in the RF measurement equipment
Basics of high-frequency sources
I am looking for a way to plot both the Time Domain and Frequency Domain at the same time
cDetection of Center frequency from a wideband modulated signal
Terms of Service
Useful Hints and Tips
Created with PlushForums
© 2022 Microwaves 101 Discussion Board