modeling a mismatched pulse amplifier....with what?
I'm creating a large-ish 20A current pulse into a smallish 50 nH inductor with about two octaves bandwidth between 5 and 20 MHz for a science project. I've had a lot of experience with Spice and don't see why I should use anything else for this but very few mfrs bother with that type of device model and I read about "harmonic balance" as a method for this but don't see the point of trying to wrap my brain around a new tool when I'm good with the one I have and it seems like it should be fit for purpose.
I would use the Spice models from 'Pxxyfet' but their transistors may be more expensive than I need. NXP makes parts that look good in a kind of TO-220-like package but all their models (when they have them at all) are in some fancy stuff like ADS. I think the NXP MRF101 might be fine for this if paralleled but models that I can use are nowhere to be found. Do I have to suck it up and carve a model out of soap or is there some help out there? Is Qucs any use for this?
Do I have to suck it up and carve a model out of soap or is there some help.
Sign in or register to add a comment.
Add a Comment
About Our Site
Biological Effects and Applications
Computer Aided Design
Emerging Applications and Technology
Filters and Passives
MMIC and RFIC
Packaging and Materials
Sources and Receivers
Test and Measurement
Options for low gain flat bandwidth amplifier
Low noise amplifier (LNA) using CE3520K3
100 W class AB amplifier using BLF647P
Wideband MMIC DA amplifier biasing
Terms of Service
Useful Hints and Tips
Created with PlushForums
© 2022 Microwaves 101 Discussion Board