Tuning L and C
Hi Can anyone help me understand the following?
In A RF system how to identify which L and C to tune ? Does this depend on the parameter we chose to improve for ex: I want to improve my return loss i tune one L or C , then to improve some other parameter do i have to tune the same L and C or someother position ?
This really is the art of microwaves, knowing what to touch and what to leave alone. Some people might look on a Smith Chart to see which direction to move reflection coefficient(s). Others may use trial and error. I often use an optimizer in Microwave Office to get the response I want. The thing that helps the most is experience, which you should be building on now.
Sign in or register to add a comment.
Add a Comment
About Our Site
Biological Effects and Applications
Computer Aided Design
Emerging Applications and Technology
Filters and Passives
MMIC and RFIC
Packaging and Materials
Sources and Receivers
Test and Measurement
Silver Plated Brass Screws for tuning
Tuning U.FL / Antenna Cable Assemblies
harmonic tuning at 30 GHz
radiated emission from power cable
Terms of Service
Useful Hints and Tips
Created with PlushForums
© 2023 Microwaves 101 Discussion Board