Problem with MultiLine TRL
I try to implement Multiline TRL Calibration for removing the effect on transmission Line at higher frequency. I found the selection procedure of multiple line lengths for the calibration in here (
One thing, they do not mention any reference - so can I rely on this calculation?
Then, as I found in other references, multi-line in TRL helps to cover the higher frequency standards. [That means we can avoid the bad calibration result at higher frequency].
But by using those procedures - the extra line just helps to cover the lower frequency.
One standard can cover down to 13.75 GHz
Two standards can cover down to 1.72 GHz
Three standards can cover down to 215 MHz
But I want to cover the higher frequency. How can I do this?
Sign in or register to add a comment.
Add a Comment
About Our Site
Biological Effects and Applications
Computer Aided Design
Emerging Applications and Technology
Filters and Passives
MMIC and RFIC
Packaging and Materials
Sources and Receivers
Test and Measurement
Heating problem Waveguide WR 1800 to Coaxial Adapter
Connectors suitable for a TRL calibration (microstrip)
Why we use Multi-Line TRL calibration?
Seeking the original reference for a microstrip line impedance formula
Terms of Service
Useful Hints and Tips
Created with PlushForums
© 2023 Microwaves 101 Discussion Board