Spectrum Analyzers and NLFM Pulse Compression measurements
I am trying to determine the proper RBW and VBW for a SA while viewing a NLFM Pulse Compressed signal. The TX is L-Band freq, 115 usec and 15 usec PW with a 5.8 MHz NLFM modulation scheme. If I use BW = 0.35/Tr I will get BW of 175 kHz for 2 usec risetime or 875 kHz for a 4 nsec risetime. So to properly measure the 3 dB points on the SA would I have measure existing risetime to properly set the RBW?
Sign in or register to add a comment.
Add a Comment
About Our Site
Biological Effects and Applications
Computer Aided Design
Emerging Applications and Technology
Filters and Passives
MMIC and RFIC
Packaging and Materials
Sources and Receivers
Test and Measurement
modeling a mismatched pulse amplifier....with what?
load pull amplifier
Wideband MMIC DA amplifier biasing
Low noise amplifier (LNA) using CE3520K3
Terms of Service
Useful Hints and Tips
Created with PlushForums
© 2019 Microwaves 101 Discussion Board