Coupler Design Question
I've been tasked with creating a 4-way coupler that has equal power in 4 ports.
There are other specifications but my first question comes from if I should use a rat-race, branchline, or some sort of hybrid model.
Franklin, we need those other specifications to be able to recommend a model.
frequency band, acceptable loss in each path, acceptable isolation between output ports, power handling.
Bandwidth is probably the most important question as some approaches are only good for narrow band.
Also, you should consider if the outputs need to have the same transmission phase...
Thank you for responding and sorry for the lack of details,
The center frequency must be 1.575GHz, Insertion Loss <5dB, Isolation >20.0dB, Phase Balance at the output <5 degrees, VSWR over passband <1.5 : 1, amplitude Balance at output <1dB.
Since I last posted I have thought about doing a 4 output wilkinson power divider. I would love to know your thoughts
Sign in or register to add a comment.
Add a Comment
About Our Site
Biological Effects and Applications
Computer Aided Design
Emerging Applications and Technology
Filters and Passives
MMIC and RFIC
Packaging and Materials
Sources and Receivers
Test and Measurement
Online Calculator to design Circularly Polarized Microstrip Antennas
Design help needed for plasma-producing system
Market research question - TDUs
How do you document your design work?
Terms of Service
Useful Hints and Tips
Created with PlushForums
© 2020 Microwaves 101 Discussion Board