• Admin
    0
    fff created the topic: Tuning U.FL / Antenna Cable Assemblies

    Cellular, Wi-Fi, GNSS and Bluetooth radios are available as FCC-certified modules with a U.FL connector that connect to an external antenna through a cable assembly. Why do you never see an antenna matching network in finished products that use this approach?
  • Admin
    0
    N10sive replied to the topic: Tuning U.FL / Antenna Cable Assemblies

    If you are talking about a module, it is most likely the supplier assumes a 50Ohm line and that the U.Fl SMT connector is 50Ohms.

    In a finished product with an antenna, the manufacturer has most likely "tuned" the antenna to the desired frequency without using a matching network.

    In the case of cellular, it is also difficult to have a desired matching network, for a multi-band antenna etc. There are also less stringent parameters specifications for VSWR in cellular, at least in the lower bands.

    This is also due to cost, efficiency, space-constraints, etc.
bold
italic
underline
strike
code
quote
ulist
image
url
mention
reveal
youtube
tweet
Add a Comment

Welcome!

Join the international conversation on a broad range of microwave and RF topics. Learn about the latest developments in our industry, post questions for your peers to answer, and weigh in with some answers if you can!